Dacia Sandero Stepway 1.5 dCi - 90 HP
ChipTuning - Dacia Sandero Stepway 1.5 dCi - 90 HP
(od roku 2013)Increasing the vehicle engine power (chiptuning) Dacia Sandero Stepway 1.5 dCi - 90 HP it is possible from the original 66 kW (90 HP) up to 92 kW (126 HP) and torque increase from 200 Nm up to 276 Nm.
Maximum speed after modification will increase by + 7 KM/H and combined fuel consumption will decrease on average by -0,60 L / 100 KM.
Detailed parameters for individual modification types (Standard, Eko, Sport) can be found below after selecting the type of modification.
-40 %
Offer until Friday: 40% off chip tuning!
Only until Friday you can improve your car’s performance at a unique price! Take advantage of a 40% chip tuning discount and gain more power with lower fuel consumption. This offer will not be repeated – book your appointment today!
Choose the modification that suits your needs
Below you will find the parameters before and after the modification Standard for vehicle: Dacia Sandero Stepway 1.5 dCi - 90 HP. Model range manufactured since 2013. This model is modified via diagnostic socket. Engine control unit by company Bosch. ECU type EDC17C42. The estimated modification time for this model is 1-2 hours.
Vehicle parameters
Before modification
After modification
- Power HP
- 90 HP
- Power kW
- 66 kW
- Torque Nm
- 200 Nm
- Maximum speed
- -
- Combined fuel consumption
- -
Power chart
Torque chart
Chiptuning
4 490 Kč
Price before discount: 7 490 Kč
Offer valid until 22.5.2026 (23:59)
For mobile modifications, the base price before discount applies.
Modification availability
- ✓Praha 5
- ✓Brno
- ✓Bystřec
- ✓České Budějovice
- ✓Hradec Králové
- ✓Jihlava
- ✓Liberec
- ✓Moravské Budějovice
- ✓Most
- ✓Ostrava
- ✓Plzeň
- ✓Sokolov
- ✓Tábor
- ✓Zlín
Partner services:
- ✓Praha 9 (LPG Praha)
If the modification cannot be ordered at your branch, please contact us. We expand the offer at individual branches every day.
Chiptuning of your vehicle includes
Take advantage of these additional services at a discounted price
We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.
Speed limiter disable
Is the top speed limiter preventing you from using the car's full performance potential? We offer its deactivation so the vehicle can reach its true maximum potential without artificial restriction.
EGR valve disable
The EGR valve (exhaust gas recirculation) is designed to reduce emissions, but in practice it often causes intake contamination, power fluctuations or a higher failure rate. By disabling the EGR, the engine runs cleaner, throttle response improves and the risk of carbon buildup is reduced.
Disabling the EGR may lead to faster DPF clogging and increased emissions.
Swirl flap disable
Swirl flaps in the intake manifold are designed to improve combustion at low load, but over time they often become clogged with carbon and may cause irregular engine operation or mechanical problems. By disabling them, we eliminate the risk of seizure or damage and ensure more stable and reliable engine operation.
For maximum reliability, we also recommend mechanically blanking the flaps.
MAF sensor disable
The MAF sensor (mass air flow meter) is used to precisely measure the amount of intake air for correct fuel dosing. Disabling it is typically used as an emergency solution in cases of wiring issues, a faulty sensor or heavily modified vehicles (for example with a hybrid turbo) where airflow exceeds the measuring range of the sensor. Engine control is then recalibrated so it can operate stably even without this input.
Disabling the MAF sensor means less precise mixture control, which can affect fuel consumption, performance and emissions. This is a compromise solution and does not replace proper fault repair or correct component sizing.
DPF disable
Are you struggling with a clogged diesel particulate filter, frequent regenerations, loss of power or increasing fuel consumption? If the cost of DPF repair or replacement is unreasonably high, we offer a software DPF disable that removes these issues and restores reliable, smooth engine operation.
Removing or disabling the DPF makes the vehicle technically unfit for road use and it will not pass a roadworthiness inspection.
Active exhaust flap disable
The active exhaust flap regulates exhaust gas flow and thus also the vehicle's noise level. In some cases, however, it limits the sound character or behaves unpredictably. By disabling it, we ensure a permanently open exhaust, a stable sound and a more natural character without electronic intervention.
Disabling the flap may lead to increased noise, especially under acceleration. The vehicle may therefore no longer meet legal noise limits for regular road use and this should be taken into account.
Technical inspection guarantee
With our modifications, we guarantee you will not have any problems at the technical inspection.
Approval by the Ministry of Transport
For selected modifications we also offer solutions prepared for legislative extensions.
Modification change
Within 14 days, you can change the selected variant to another one free of charge.
Data backup
Original data remains safely archived for possible future restoration.
Interested in one of our services? Or do you have a question? Get in touch with us!
Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.