Mercedes-Benz A-Class 180 CDI CVT - 109 HP

ChipTuning - Mercedes-Benz A-Class 180 CDI CVT - 109 HP

(od roku 2010)

Increasing the vehicle engine power (chiptuning) Mercedes-Benz A-Class 180 CDI CVT - 109 HP it is possible from the original 80 kW (109 HP) up to 110 kW (151 HP) and torque increase from 250 Nm up to 345 Nm.

Maximum speed after modification will increase by + 9 KM/H and combined fuel consumption will decrease on average by -0,70 L / 100 KM.

Detailed parameters for individual modification types (Standard, Eko, Sport) can be found below after selecting the type of modification.

-40 %

Akce do pátku: Chiptuning se slevou 40 %!

Only until Friday can you improve your car's performance at a unique price! Take advantage of a 40% discount on chiptuning and get more power with lower fuel consumption. This offer will not be repeated - book your appointment today!

Choose the modification that suits your needs

Below you will find the parameters before and after the modification Standard for vehicle: Mercedes-Benz A-Class 180 CDI CVT - 109 HP. Model range W169, manufactured since 2010. Engine control unit by company Bosch. ECU type EDC17C43. The estimated modification time for this model is 2-4 hours.

  • Vehicle parameters

  • Before modification

  • After modification

  • Power HP
  • 109 HP
  • Power kW
  • 80 kW
  • Torque Nm
  • 250 Nm
  • Maximum speed
  • -
  • Combined fuel consumption
  • -
  • Modification price
  • -

Power chart

Torque chart

Chiptuning

5 090 Kč

Price before discount: 8 490 Kč

Offer valid until 10.4.2026 (23:59)

For mobile modifications, the base price before discount applies.

Modification availability

  • Praha 5 (nová adresa)
  • Brno
  • Bystřec
  • České Budějovice
  • Hradec Králové
  • Jihlava
  • Liberec
  • Moravské Budějovice
  • Most
  • Ostrava
  • Plzeň
  • Sokolov
  • Tábor
  • Zlín

Partner services:

  • Praha 9 (LPG Praha)

If the modification cannot be ordered at your branch, please contact us. We expand the offer at individual branches every day.

Chiptuning of your vehicle includes

computer diagnostics of the engine control unit before and after the modification
engine power measurement on a dyno after modification *
air mass meter refurbishment (so-called air flow meter) **
modification of your current ECU program
backup of the original software at our company
backup of original ECU data on CD ***
assistance services
option to assume warranty for the engine. Learn more >

Take advantage of these additional services at a discounted price

We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.

EGR deactivation

EGR deactivation

If you have EGR valve issues such as slight hesitation during steady driving or increased fuel consumption, disabling the EGR may be the right choice.

Disabling the EGR negatively affects DPF lifespan. We recommend it only for vehicles without a particulate filter or when the filter has already been removed.

+ 1 790 Kč
4 290 Kč (separately)
Swirl flap deactivation

Swirl flap deactivation

The now outdated swirl flap system often causes serious problems, especially if a flap comes loose and falls into the engine. We offer software deactivation of this system.

After the software modification, we recommend mechanically blanking the flaps with a repair kit, which is not included in the service.

+ 1 790 Kč
4 290 Kč (separately)
MAF sensor deactivation

MAF sensor deactivation

Disables the mass air flow sensor function. Especially suitable for vehicles with electrical issues where replacing the MAF sensor does not help.

+ 1 290 Kč
2 790 Kč (separately)
DPF deactivation

DPF deactivation

If you are dealing with a clogged diesel particulate filter, frequent regenerations, low power or high fuel consumption, and the cost of a new filter exceeds the value of the vehicle, removal may be the right solution.

Removing the DPF makes the vehicle illegal for use on public roads and it will not pass technical inspection.

+ 3 490 Kč
4 990 Kč (separately)
Readiness monitor calibration

Readiness monitor calibration

Readiness calibration adjusts the state of individual OBD monitors so that diagnostic checks can complete correctly after a software modification and emissions inspection issues are reduced.

Service availability is verified for the specific ECU.

+ 3 290 Kč
4 790 Kč (separately)

Technical inspection guarantee

With our modifications, we guarantee you will not have any problems at the technical inspection.

Approval by the Ministry of Transport

For selected modifications we also offer solutions prepared for legislative extensions.

Modification change

Within 14 days, you can change the selected variant to another one free of charge.

Data backup

Original data remains safely archived for possible future restoration.

Interested in one of our services? Or do you have a question? Get in touch with us!

Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.