Volvo V40 1.5 T3 - 152 HP
ChipTuning - Volvo V40 1.5 T3 - 152 HP
(od roku 2019)Increasing the vehicle engine power (chiptuning) Volvo V40 1.5 T3 - 152 HP it is possible from the original 112 kW (152 HP) up to 147 kW (199 HP) and torque increase from 250 Nm up to 341 Nm.
Maximum speed after modification will increase by + 7 KM/H and combined fuel consumption will decrease on average by -0,60 L / 100 KM.
Detailed parameters for individual modification types (Standard, Eko, Sport) can be found below after selecting the type of modification.
-40 %
Offer until Friday: 40% off chip tuning!
Only until Friday you can improve your car’s performance at a unique price! Take advantage of a 40% chip tuning discount and gain more power with lower fuel consumption. This offer will not be repeated – book your appointment today!
Choose the modification that suits your needs
Below you will find the parameters before and after the modification Standard for vehicle: Volvo V40 1.5 T3 - 152 HP. Model range manufactured since 2019. This model is modified via připojením na konektory řídící jednotky bez rozebírání jednotky. Engine control unit by company Bosch. ECU type MG1CS080. The estimated modification time for this model is 1.5-2.5 hours.
Vehicle parameters
Before modification
After modification
- Power HP
- 152 HP
- Power kW
- 112 kW
- Torque Nm
- 250 Nm
- Maximum speed
- -
- Combined fuel consumption
- -
Power chart
Torque chart
Chiptuning
5 690 Kč
Price before discount: 9 490 Kč
Offer valid until 22.5.2026 (23:59)
For mobile modifications, the base price before discount applies.
Modification availability
- ✓Praha 5
- ✓Brno
- ✓Bystřec
- ✓České Budějovice
- ✓Hradec Králové
- ✓Jihlava
- ✓Liberec
- ✓Moravské Budějovice
- ✓Most
- ✓Ostrava
- ✓Plzeň
- ✓Sokolov
- ✓Tábor
- ✓Zlín
Partner services:
- ✓Praha 9 (LPG Praha)
If the modification cannot be ordered at your branch, please contact us. We expand the offer at individual branches every day.
Chiptuning of your vehicle includes
Take advantage of these additional services at a discounted price
We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.
EGR valve disable
The EGR valve (exhaust gas recirculation) is designed to reduce emissions, but in practice it often causes intake contamination, power fluctuations or a higher failure rate. By disabling the EGR, the engine runs cleaner, throttle response improves and the risk of carbon buildup is reduced.
Disabling the EGR may lead to faster DPF clogging and increased emissions.
Lambda sensor disable
Do you use a sports exhaust where installing a lambda sensor is not possible, or are you dealing with lambda sensor faults and error messages? We offer a software lambda disable that ensures stable engine operation without unwanted limitations.
Disabling the lambda sensor limits closed-loop combustion control, which may affect fuel consumption, emissions and engine management precision. This modification is mainly intended for modified vehicles and is not suitable for regular road use.
Readiness calibration of emission monitors
Readiness calibration adjusts the status of individual OBD monitors so that diagnostic tests can be completed correctly. In practice, it can help bypass emissions inspection issues, for example when the vehicle has a fault or a modified emissions system.
This modification interferes with the vehicle's emission diagnostic systems and may conflict with legal requirements. A vehicle with this modification may not meet the conditions for road use.
GPF / OPF filter disable
Are you dealing with a clogged petrol particulate filter (GPF/OPF), frequent regenerations or loss of performance? If repair or replacement costs are too high, we offer a software disable that eliminates these issues and ensures smoother, more reliable engine operation.
Removing or disabling the GPF/OPF filter makes the vehicle technically unfit for road use and it will not pass a roadworthiness inspection.
EVAP system disable
The EVAP system captures and re-burns fuel vapors from the tank, thereby reducing emissions. In practice, however, it may cause fault messages, unstable idle or issues after fuel system modifications. By disabling it, we ensure more stable engine operation without unwanted interventions and recurring errors.
Disabling the EVAP system leads to increased emissions and may allow fuel vapors to escape into the surroundings.
Technical inspection guarantee
With our modifications, we guarantee you will not have any problems at the technical inspection.
Approval by the Ministry of Transport
For selected modifications we also offer solutions prepared for legislative extensions.
Modification change
Within 14 days, you can change the selected variant to another one free of charge.
Data backup
Original data remains safely archived for possible future restoration.
Interested in one of our services? Or do you have a question? Get in touch with us!
Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.