Audi SQ7 4.0 V8 TDI Quattro Automat - 435 HP
ChipTuning - Audi SQ7 4.0 V8 TDI Quattro Automat - 435 HP
(od roku 2016)Increasing the vehicle engine power (chiptuning) Audi SQ7 4.0 V8 TDI Quattro Automat - 435 HP it is possible from the original 320 kW (435 HP) up to 385 kW (525 HP) and torque increase from 900 Nm up to 948 Nm.
Maximum speed after modification will increase by + 16 KM/H and combined fuel consumption will decrease on average by -1,20 L / 100 KM.
Detailed parameters for individual modification types (Standard, Eko, Sport) can be found below after selecting the type of modification.
-40 %
Akce do pátku: Chiptuning se slevou 40 %!
Only until Friday can you improve your car's performance at a unique price! Take advantage of a 40% discount on chiptuning and get more power with lower fuel consumption. This offer will not be repeated - book your appointment today!
Choose the modification that suits your needs
Below you will find the parameters before and after the modification Standard for vehicle: Audi SQ7 4.0 V8 TDI Quattro Automat - 435 HP. Model range manufactured since 2016. Engine control unit by company Bosch. ECU type MD1CP014. This modification is adapted for an automatic transmission. The estimated modification time for this model is 2-4 hours.
Vehicle parameters
Before modification
After modification
- Power HP
- 435 HP
- Power kW
- 320 kW
- Torque Nm
- 900 Nm
- Maximum speed
- -
- Combined fuel consumption
- -
- Modification price
- -
Power chart
Torque chart
Chiptuning
1 299 zł
Price before discount: 2 169 zł
Offer valid until 10.4.2026 (23:59)
There is currently no branch available for booking this vehicle type in this country.
Modification availability
Chiptuning of your vehicle includes
Take advantage of these additional services at a discounted price
We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.
Oil pressure optimization
We offer an ECU software modification that increases oil pressure at low engine RPM. This optimization improves lubrication, reduces engine wear and helps extend engine life. Thanks to this modification, the engine is smoother and more reliable even under demanding use.
StartStop deactivation
Do you dislike the engine constantly shutting off at intersections? Our StartStop deactivation is the right choice for you.
Warm start fix
Does the engine crank easily but refuse to start when warm? We can solve this with a software fix in the control unit for prolonged hot starts.
Speed limiter deactivation
Do you enjoy driving fast but the speed limiter will not allow it? Take advantage of the option to disable this limiter.
EGR deactivation
If you have EGR valve issues such as slight hesitation during steady driving or increased fuel consumption, disabling the EGR may be the right choice.
Disabling the EGR negatively affects DPF lifespan. We recommend it only for vehicles without a particulate filter or when the filter has already been removed.
Swirl flap deactivation
The now outdated swirl flap system often causes serious problems, especially if a flap comes loose and falls into the engine. We offer software deactivation of this system.
After the software modification, we recommend mechanically blanking the flaps with a repair kit, which is not included in the service.
MAF sensor deactivation
Disables the mass air flow sensor function. Especially suitable for vehicles with electrical issues where replacing the MAF sensor does not help.
DPF deactivation
If you are dealing with a clogged diesel particulate filter, frequent regenerations, low power or high fuel consumption, and the cost of a new filter exceeds the value of the vehicle, removal may be the right solution.
Removing the DPF makes the vehicle illegal for use on public roads and it will not pass technical inspection.
AdBlue deactivation
If you want to reduce running costs or you are bothered by constant AdBlue refills, disabling AdBlue dosing may be the right solution.
Readiness monitor calibration
Readiness calibration adjusts the state of individual OBD monitors so that diagnostic checks can complete correctly after a software modification and emissions inspection issues are reduced.
Service availability is verified for the specific ECU.
Technical inspection guarantee
With our modifications, we guarantee you will not have any problems at the technical inspection.
Approval by the Ministry of Transport
For selected modifications we also offer solutions prepared for legislative extensions.
Modification change
Within 14 days, you can change the selected variant to another one free of charge.
Data backup
Original data remains safely archived for possible future restoration.
Interested in one of our services? Or do you have a question? Get in touch with us!
Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.