Mercedes-Benz E-Class T-Model 350 D 4Matic Automat - 286 HP

Automatic transmission shift optimization

Optimizing the shift strategy of an automatic transmission brings smoother driving, faster throttle response and better use of engine power. The gearbox shifts at ideal RPM so the engine is not unnecessarily lugged, which improves comfort in everyday driving as well as acceleration dynamics. The modification can also reduce unnecessary downshifts and repeated searching for the right gear.

Start-Stop system disable

The Start-Stop system automatically shuts the engine off when the vehicle stops, for example at traffic lights, in order to reduce fuel consumption and emissions. In practice, however, it often feels intrusive, slows down take-offs, reduces driving comfort and unnecessarily strains the starter and battery. Disabling this function provides smoother and more natural vehicle behavior without constant engine stop-start cycles.

Disabling the Start-Stop system may lead to a slight increase in fuel consumption and emissions, especially in city driving.

EGR valve disable

The EGR valve (exhaust gas recirculation) is designed to reduce emissions, but in practice it often causes intake contamination, power fluctuations or a higher failure rate. By disabling the EGR, the engine runs cleaner, throttle response improves and the risk of carbon buildup is reduced.

Disabling the EGR may lead to faster DPF clogging and increased emissions.

Swirl flap disable

Swirl flaps in the intake manifold are designed to improve combustion at low load, but over time they often become clogged with carbon and may cause irregular engine operation or mechanical problems. By disabling them, we eliminate the risk of seizure or damage and ensure more stable and reliable engine operation.

For maximum reliability, we also recommend mechanically blanking the flaps.

DPF disable

Are you struggling with a clogged diesel particulate filter, frequent regenerations, loss of power or increasing fuel consumption? If the cost of DPF repair or replacement is unreasonably high, we offer a software DPF disable that removes these issues and restores reliable, smooth engine operation.

Removing or disabling the DPF makes the vehicle technically unfit for road use and it will not pass a roadworthiness inspection.

AdBlue disable

Do you want to reduce operating costs, are you tired of constantly refilling AdBlue, or are you dealing with repeated failures of this system? By disabling AdBlue injection, we remove these concerns and help you avoid often unreasonable and repeated repair costs that can easily reach thousands.

Readiness calibration of emission monitors

Readiness calibration adjusts the status of individual OBD monitors so that diagnostic tests can be completed correctly. In practice, it can help bypass emissions inspection issues, for example when the vehicle has a fault or a modified emissions system.

This modification interferes with the vehicle's emission diagnostic systems and may conflict with legal requirements. A vehicle with this modification may not meet the conditions for road use.