BMW 3-Series 325i Automat - 218 HP
ChipTuning - BMW 3-Series 325i Automat - 218 HP
(od roku 2007)Increasing the vehicle engine power (chiptuning) BMW 3-Series 325i Automat - 218 HP it is possible from the original 160 kW (218 HP) up to 176 kW (242 HP) and torque increase from 270 Nm up to 302 Nm.
Maximum speed after modification will increase by + 5 KM/H and combined fuel consumption will decrease on average by -0,70 L / 100 KM.
Detailed parameters for individual modification types (Standard, Eko) can be found below after selecting the type of modification.
-40 %
Offer until Friday: 40% off chip tuning!
Only until Friday you can improve your car’s performance at a unique price! Take advantage of a 40% chip tuning discount and gain more power with lower fuel consumption. This offer will not be repeated – book your appointment today!
Choose the modification that suits your needs
Below you will find the parameters before and after the modification Standard for vehicle: BMW 3-Series 325i Automat - 218 HP. Model range E90, manufactured since 2007. This model is modified via diagnostic socket. Engine control unit by company Continental. ECU type MSD80 or MSD81. This modification is adapted for an automatic transmission. The estimated modification time for this model is 1-2 hours.
Vehicle parameters
Before modification
After modification
- Power HP
- 218 HP
- Power kW
- 160 kW
- Torque Nm
- 270 Nm
- Maximum speed
- -
- Combined fuel consumption
- -
Power chart
Torque chart
Chiptuning
209 €
Price before discount: 349 €
Offer valid until 10.4.2026 (23:59)
For mobile modifications, the base price before discount applies.
Modification availability
- ✓Bratislava
- ✓Košice
- ✓Vráble
- ✓Žilina
Chiptuning of your vehicle includes
Take advantage of these additional services at a discounted price
We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.
Speed limiter disable
Is the top speed limiter preventing you from using the car's full performance potential? We offer its deactivation so the vehicle can reach its true maximum potential without artificial restriction.
EGR valve disable
The EGR valve (exhaust gas recirculation) is designed to reduce emissions, but in practice it often causes intake contamination, power fluctuations or a higher failure rate. By disabling the EGR, the engine runs cleaner, throttle response improves and the risk of carbon buildup is reduced.
Disabling the EGR may lead to faster DPF clogging and increased emissions.
Lambda sensor disable
Do you use a sports exhaust where installing a lambda sensor is not possible, or are you dealing with lambda sensor faults and error messages? We offer a software lambda disable that ensures stable engine operation without unwanted limitations.
Disabling the lambda sensor limits closed-loop combustion control, which may affect fuel consumption, emissions and engine management precision. This modification is mainly intended for modified vehicles and is not suitable for regular road use.
Burbles / Crackles activation
By modifying the ECU, we activate the so-called burbles / crackles effect, which creates characteristic popping and crackling from the exhaust when lifting off the throttle or downshifting. This effect is typical for sporty and high-performance vehicles and gives the car a more emotional and pronounced sound character.
This modification increases the thermal load on the exhaust system (especially the catalytic converter and turbocharger) and may lead to faster wear or damage. It is not suitable for long-term normal road use or stock vehicles without additional modifications.
Active exhaust flap disable
The active exhaust flap regulates exhaust gas flow and thus also the vehicle's noise level. In some cases, however, it limits the sound character or behaves unpredictably. By disabling it, we ensure a permanently open exhaust, a stable sound and a more natural character without electronic intervention.
Disabling the flap may lead to increased noise, especially under acceleration. The vehicle may therefore no longer meet legal noise limits for regular road use and this should be taken into account.
Technical inspection guarantee
With our modifications, we guarantee you will not have any problems at the technical inspection.
Approval by the Ministry of Transport
For selected modifications we also offer solutions prepared for legislative extensions.
Modification change
Within 14 days, you can change the selected variant to another one free of charge.
Data backup
Original data remains safely archived for possible future restoration.
Interested in one of our services? Or do you have a question? Get in touch with us!
Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.