Ford S-Max 2.2 TDCi Automat - 200 HP
ChipTuning - Ford S-Max 2.2 TDCi Automat - 200 HP
(od roku 2010)Increasing the vehicle engine power (chiptuning) Ford S-Max 2.2 TDCi Automat - 200 HP it is possible from the original 147 kW (200 HP) up to 185 kW (252 HP) and torque increase from 420 Nm up to 556 Nm.
Maximum speed after modification will increase by + 11 KM/H and combined fuel consumption will decrease on average by -0,90 L / 100 KM.
Detailed parameters for individual modification types (Standard, Eko, Sport) can be found below after selecting the type of modification.
-40 %
Offer until Friday: 40% off chip tuning!
Only until Friday you can improve your car’s performance at a unique price! Take advantage of a 40% chip tuning discount and gain more power with lower fuel consumption. This offer will not be repeated – book your appointment today!
Choose the modification that suits your needs
Below you will find the parameters before and after the modification Standard for vehicle: Ford S-Max 2.2 TDCi Automat - 200 HP. Model range manufactured since 2010. This model is modified via připojením na konektory řídící jednotky bez rozebírání jednotky. Engine control unit by company Bosch. ECU type EDC17CP42. This modification is adapted for an automatic transmission. The estimated modification time for this model is 1.5-2.5 hours.
Vehicle parameters
Before modification
After modification
- Power HP
- 200 HP
- Power kW
- 147 kW
- Torque Nm
- 420 Nm
- Maximum speed
- -
- Combined fuel consumption
- -
Power chart
Torque chart
Chiptuning
229 €
Price before discount: 369 €
Offer valid until 1.5.2026 (23:59)
For mobile modifications, the base price before discount applies.
Modification availability
- ✓Bratislava
- ✓Košice
- ✓Vráble
- ✓Žilina
Chiptuning of your vehicle includes
Take advantage of these additional services at a discounted price
We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.
Hot start repair
Some vehicles may suffer from hot start issues, where the engine cranks for too long, starts reluctantly or behaves irregularly once warm. By adjusting the software, we correct unsuitable start map settings and ensure quick, smooth and reliable starts even with a warmed-up engine.
This modification does not solve issues caused by a faulty fuel pump – in such cases, a mechanical repair is required.
EGR valve disable
The EGR valve (exhaust gas recirculation) is designed to reduce emissions, but in practice it often causes intake contamination, power fluctuations or a higher failure rate. By disabling the EGR, the engine runs cleaner, throttle response improves and the risk of carbon buildup is reduced.
Disabling the EGR may lead to faster DPF clogging and increased emissions.
MAF sensor disable
The MAF sensor (mass air flow meter) is used to precisely measure the amount of intake air for correct fuel dosing. Disabling it is typically used as an emergency solution in cases of wiring issues, a faulty sensor or heavily modified vehicles (for example with a hybrid turbo) where airflow exceeds the measuring range of the sensor. Engine control is then recalibrated so it can operate stably even without this input.
Disabling the MAF sensor means less precise mixture control, which can affect fuel consumption, performance and emissions. This is a compromise solution and does not replace proper fault repair or correct component sizing.
DPF disable
Are you struggling with a clogged diesel particulate filter, frequent regenerations, loss of power or increasing fuel consumption? If the cost of DPF repair or replacement is unreasonably high, we offer a software DPF disable that removes these issues and restores reliable, smooth engine operation.
Removing or disabling the DPF makes the vehicle technically unfit for road use and it will not pass a roadworthiness inspection.
Readiness calibration of emission monitors
Readiness calibration adjusts the status of individual OBD monitors so that diagnostic tests can be completed correctly. In practice, it can help bypass emissions inspection issues, for example when the vehicle has a fault or a modified emissions system.
This modification interferes with the vehicle's emission diagnostic systems and may conflict with legal requirements. A vehicle with this modification may not meet the conditions for road use.
Technical inspection guarantee
With our modifications, we guarantee you will not have any problems at the technical inspection.
Approval by the Ministry of Transport
For selected modifications we also offer solutions prepared for legislative extensions.
Modification change
Within 14 days, you can change the selected variant to another one free of charge.
Data backup
Original data remains safely archived for possible future restoration.
Interested in one of our services? Or do you have a question? Get in touch with us!
Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.