Mercedes-Benz C-Class T-Model 220 CDI Automat - 125 HP

ChipTuning - Mercedes-Benz C-Class T-Model 220 CDI Automat - 125 HP

(od roku 1997)

Increasing the vehicle engine power (chiptuning) Mercedes-Benz C-Class T-Model 220 CDI Automat - 125 HP it is possible from the original 92 kW (125 HP) up to 126 kW (169 HP) and torque increase from 300 Nm up to 405 Nm.

Maximum speed after modification will increase by + 11 KM/H and combined fuel consumption will decrease on average by -0,90 L / 100 KM.

Detailed parameters for individual modification types (Standard, Eko, Sport) can be found below after selecting the type of modification.

-40 %

Offer until Friday: 40% off chip tuning!

Only until Friday you can improve your car’s performance at a unique price! Take advantage of a 40% chip tuning discount and gain more power with lower fuel consumption. This offer will not be repeated – book your appointment today!

Choose the modification that suits your needs

Below you will find the parameters before and after the modification Standard for vehicle: Mercedes-Benz C-Class T-Model 220 CDI Automat - 125 HP. Model range S202, manufactured since 1997. This model is modified via diagnostic socket. Engine control unit by company Bosch. ECU type EDC15C0. This modification is adapted for an automatic transmission. The estimated modification time for this model is 1-2 hours.

  • Vehicle parameters

  • Before modification

  • After modification

  • Power HP
  • 125 HP
  • Power kW
  • 92 kW
  • Torque Nm
  • 300 Nm
  • Maximum speed
  • -
  • Combined fuel consumption
  • -

Power chart

Before modification After modification

Torque chart

Before modification After modification

Chiptuning

4 790 Kč

Price before discount: 7 990 Kč

Offer valid until 1.5.2026 (23:59)

For mobile modifications, the base price before discount applies.

Modification availability

  • Praha 5 (nová adresa)
  • Brno
  • Bystřec
  • České Budějovice
  • XHradec Králové
  • Jihlava
  • Liberec
  • Moravské Budějovice
  • Most
  • Ostrava
  • Plzeň
  • Sokolov
  • Tábor
  • Zlín

Partner services:

  • Praha 9 (LPG Praha)

If the modification cannot be ordered at your branch, please contact us. We expand the offer at individual branches every day.

Chiptuning of your vehicle includes

computer diagnostics of the engine control unit before and after the modification
engine power measurement on a dyno after modification *
air mass meter refurbishment (so-called air flow meter) **
modification of your current ECU program
backup of the original software at our company
backup of original ECU data on CD ***
assistance services
option to assume warranty for the engine. Learn more >

Take advantage of these additional services at a discounted price

We also recommend using our additional services. Service availability depends on the equipment and configuration of your vehicle. Additional services cannot be combined with Chiptuning Premium. Please select the service in the order form.

EGR valve disable

EGR valve disable

The EGR valve (exhaust gas recirculation) is designed to reduce emissions, but in practice it often causes intake contamination, power fluctuations or a higher failure rate. By disabling the EGR, the engine runs cleaner, throttle response improves and the risk of carbon buildup is reduced.

Disabling the EGR may lead to faster DPF clogging and increased emissions.

+ 2 790 Kč
5 290 Kč (separately)
MAF sensor disable

MAF sensor disable

The MAF sensor (mass air flow meter) is used to precisely measure the amount of intake air for correct fuel dosing. Disabling it is typically used as an emergency solution in cases of wiring issues, a faulty sensor or heavily modified vehicles (for example with a hybrid turbo) where airflow exceeds the measuring range of the sensor. Engine control is then recalibrated so it can operate stably even without this input.

Disabling the MAF sensor means less precise mixture control, which can affect fuel consumption, performance and emissions. This is a compromise solution and does not replace proper fault repair or correct component sizing.

+ 2 290 Kč
3 790 Kč (separately)

Technical inspection guarantee

With our modifications, we guarantee you will not have any problems at the technical inspection.

Approval by the Ministry of Transport

For selected modifications we also offer solutions prepared for legislative extensions.

Modification change

Within 14 days, you can change the selected variant to another one free of charge.

Data backup

Original data remains safely archived for possible future restoration.

Interested in one of our services? Or do you have a question? Get in touch with us!

Use our contact form or one of the direct contacts for your branch and get in touch. We will gladly help you and answer your questions.